How To Install A Shift Solenoid

How to Replace a Manual Solenoid Vs. Rebuilding Information technology

past Baptist Johnson

IT Stock Free/Polka Dot/Getty Images

The control solenoid is an essential component of the manual organisation. It helps regulate the torque converter lockup, pressure control, and shifting and kickdown for passing gears. One common symptom of a faulty control solenoid is that your transmission may experience problems shifting gears. While in movement, your vehicle volition slip out of gear. Bug with the control solenoid are ofttimes accompanied by you seeing the check transmission light illuminated on your dashboard. One time y'all take verified that your transmission control solenoid has gone bad, you lot need to repair it immediately. Consider replacing the component, rather than attempting to rebuild your unabridged transmission.

Footstep 1

Drive your vehicle to an automotive parts store. Ask a technician to connect a diagnostic computer code device to your vehicle. Most automotive stores volition do this for gratis. Employ the diagnostic code to identify which manual solenoid has gone bad. Your vehicle may employ as many every bit vi solenoids.

Footstep 2

Purchase a replacement solenoid from the automotive parts store. Drive your vehicle to a safe identify to complete your repairs. A well-ventilated garage may be a suitable option. Ensure the surface area you cull has an even ground and is fairly clear of obstacles.

Stride 3

Park your vehicle and turn off the ignition. Apply wheel blocks to the rear tires to assist prevent the vehicle from rolling while you are replacing the solenoid. Enhance the front-finish of the vehicle using a automobile jack. Identify the front axles on jack stands to proceed the vehicle elevated.

Step 4

Crawl underneath the hood area of the vehicle. Locate the manual well-nigh the front end of the hood area on the commuter's side of the vehicle. Audit the transmission carefully. Notice that there is a fluid compartment attached to the bottom of the transmission. Place an oil pan directly underneath this fluid compartment.

Step five

Remove the bolts that secure the fluid compartment to the transmission using a wrench-and-socket set. You may to try a few sockets before finding the right size socket for the transmission mounting bolts. Every bit you are loosening the transmission bolts, manual fluid will likely spill from the fluid container. This is normal and to be expected. Adjust the oil pan as necessary to take hold of the leaking transmission fluid. Set up each bolt aside as you remove it from the transmission.

Step 6

Pry the fluid container from the transmission using a flathead screwdriver. Cascade the remaining manual fluid into the oil pan. Set the fluid container aside. Audit the within of the transmission. Locate the solenoid housing area. Discover that each solenoid is colored-coded to help yous place the dissimilar components.

Step 7

Locate the solenoid that you demand to replace using the color-coded wires for assistance. Ensure that the colour-coded wires match the color on the replacement solenoid you lot purchased. Audit the solenoid for a mounting commodities. Remove the commodities using a wrench if yous discover 1. Unplug the wire from the solenoid past but pulling it away from the solenoid. Pry the solenoid from the transmission using a flathead screwdriver. Discard the solenoid.

Step 8

Employ a small amount of transmission fluid to the replacement solenoid. Ensure the O-band is properly lubricated. Supercede the discarded solenoid with the replacement solenoid. Press the solenoid into identify until you hear an aural click. Reconnect the wire to the solenoid. Replace the mounting bolt, if y'all previously removed 1.

Step nine

Wipe down the transmission fluid container using a clean material rag. Ensure that all the manual fluid and old gasket material is removed from the container. Wipe every bit much fluid, metallic shavings and dust from the container as you lot can. Apply a new gasket to the rim of the fluid pan. Practice non use more a sparse bead or you chance damaging your transmission.

Supplant the fluid pan to the undercarriage of your transmission. Replace the mounting bolts that you previously removed and set bated. Allow the gasket to set per the instructions given on the gasket tube. Crawl from underneath the vehicle. Lower the vehicle to the basis. Refill your vehicle with new transmission fluid. While refilling your transmission fluid, cheque your fluid level often. Exercise non overfill your manual.

References

Things You'll Need

• Replacement solenoid
• Transmission fluid
• Transmission filter kit
• Wrench and socket set
• Flathead screwdriver
• Oil pan
• Motorcar jack
• Jack stands
• Cloth rag

Writer Bio

Baptist Johnson was outset published in 2000 when a poem he wrote won first prize in a local writing contest. He too writes and edits for Etched Printing Society, a micro-publishing visitor based in Wilmington, N.C. Johnson has a Bachelor of Science in business administration from Eastward Carolina Academy.

More Manufactures

Source: https://itstillruns.com/replace-transmission-solenoid-vs-rebuilding-12018333.html

Posted by: ellisaffel1999.blogspot.com

Share this post